Dacor Refrigerator Error Code E9

The Dacor refrigerator error code E9 indicates a power supply failure.

This can be caused by a number of factors, including:

A power outage
A loose or damaged power cord
A faulty power outlet
A problem with the refrigerator’s power supply circuitry

To troubleshoot the error code E9, follow these steps:

Check the power outlet to make sure it is properly plugged in and that the power is turned on.
Check the power cord to make sure it is not damaged. If the power cord is damaged, replace it.
Try plugging the refrigerator into a different power outlet.
If you have tried all of these steps and the error code is still appearing, contact a qualified technician for further diagnosis.

DIY Repair

If you are comfortable working with electrical components, you may be able to repair the error code E9 yourself. To do this, you will need to access the refrigerator’s power supply circuitry.

Once you have accessed the power supply circuitry, check for any signs of damage. If you find any damage, repair or replace the damaged components.

If you are not comfortable working with electrical components, it is best to contact a qualified technician for further diagnosis and repair.

Here are some additional troubleshooting tips for the error code E9:

Check the voltage and amperage at the power outlet. The voltage should be between 110 and 120 volts, and the amperage should be between 15 and 20 amps. If the voltage or amperage is outside of these ranges, the refrigerator may not be able to power on.
Check the refrigerator’s fuse or circuit breaker. If the fuse is blown or the circuit breaker has tripped, replace the fuse or reset the circuit breaker.
Check the refrigerator’s power supply board. The power supply board is responsible for supplying power to the refrigerator’s components. If the power supply board is faulty, it will need to be replaced.

If you have followed all of these troubleshooting steps and the error code is still appearing, the refrigerator may need to be replaced.